21'' 144 cc Gas-Powered 4-Stroke Engine Push Lawn Mower, 3-in-1 Design, Steel Deck, 6-Level 1.25''-3.75'' Cutting Height, with 1.7 Bushels Grass Bag LSPG-M14

Yes. The SENIX LSPG-M14 features a 144cc 4-cycle OHV engine and a 21-inch cutting width, making it a practical choice for small to medium-sized residential lawns. It's designed for yards up to 1/3 acre under typical mowing conditions. Its durable steel deck and wide cutting path help you cover more ground with fewer passes, while the compact push-mower design makes everyday lawn maintenance convenient.

The SENIX LSPG-M14 is a manual push mower, not a self-propelled model. It weighs approximately 54 lbs without fuel and features 8-inch front wheels and 11-inch rear wheels for improved maneuverability. Its high-wheel design helps navigate uneven lawns and obstacles. It's best suited for homeowners who prefer a straightforward push mower and can comfortably handle the pushing effort.

Yes. The SENIX LSPG-M14 features a 144cc OHV engine delivering a rated 3.4 HP and 5.8 ft-lb of torque for routine mowing and moderately thick grass. Its 21-inch steel cutting deck provides reliable performance for residential lawn maintenance. For tall or overgrown grass, raise the cutting height, reduce your walking speed, and make additional passes as needed. Avoid mowing wet grass for better cutting results.

Yes. The SENIX LSPG-M14 features a 3-in-1 mowing system with mulching, rear bagging, and side discharge. Mulching returns finely cut grass clippings to your lawn, rear bagging collects clippings in the included 1.7-bushel grass bag, and side discharge helps manage longer grass. The mower includes the necessary mulching and discharge components, allowing you to choose the best mowing method for your lawn.

Yes. The SENIX LSPG-M14 offers six cutting-height positions ranging from 1.25 to 3.75 inches, allowing you to adjust the blade height for different grass types and seasonal conditions. Use a higher setting during hot or dry weather to help protect your lawn. For healthier grass, avoid removing more than one-third of the grass blade in a single pass. Always stop the engine before adjusting the cutting height.

No. The SENIX LSPG-M14 uses a 144cc 4-cycle OHV engine that runs on unleaded gasoline without mixing gas and engine oil. Engine oil is added separately, and a bottle of oil is included for initial setup. The owner's manual specifies SAE 30 engine oil for suitable operating temperatures. Always check the oil level with the dipstick before starting, and follow the manual's recommendations for fuel and oil.

The SENIX LSPG-M14 requires basic handle and grass bag assembly before first use. It features a primer bulb and recoil starter for straightforward engine starting. Add the recommended engine oil and fresh gasoline, then press the primer bulb three times for a cold start. Hold the blade control against the handle and pull the starter rope as directed in the owner's manual. Proper setup and regular maintenance help support reliable starting.

The SENIX LSPG-M14 requires regular engine oil checks, periodic oil changes, air filter cleaning, spark plug inspection, and blade maintenance. Clean grass clippings from the cutting deck after mowing and inspect the wheels and height adjustment mechanisms regularly. Its foldable handle helps save storage space in a garage or shed. Always follow the owner's manual for proper fuel storage, maintenance intervals, and safe handling.